0 Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

Review Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

Buy Cheap Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool From Here Now!

Designed for drilling, sanding, shaping, detailing and other light-duty jobs, this compact, go-anywhere, use-anytime tool comes in extremely handy in and around the house. It features two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank.

Readmore

Technical Details

- Cordless small rotary tool; compatible with Dremel bit accessories; 1/8-inch collet
- Small rotary tool ideal for delicate tasks and finer work; 2 speeds (5,000 and 10,000 rpm)
- Lightweight plastic housing
- Includes rotary tool, sanding drum, small felt wheel, fine sanding band, carbide stone
- 8 inches long; 2 pounds; 2-year warranty
See more technical details

 "Skeptical at first" 2010-04-09
By LN714 (California)
The first time I tried this on my puppy, it was an absolute nightmare. She hated the noise and was yelping bloody murder. I was disappointed, and ordered a normal nail clipper on Amazon. She was much more at ease with the nail clipper and getting her feet handled through treats after each nail trimming. However, I was disappointed at how the nail clipper crushed her nails instead of cut it. So, I went back to the Dremel and turned it on "low." I left it running with her on my lap and then gently tapped her nails, which followed by more treats. Here are a few tips:



1) Start off with a nail clipper, so your puppy will get used to getting her feet handled. If it's the first time, the goal is not really to cut the dog's nails, but only to acquaint them with the tool and handling

2) Always follow each nail trimming with a reward/treat, and then gradually increase it to each paw.

3) Don't file a nail down too long, because the heat friction against the quick can hurt the dog. I move from nail to nail and then come back to shorten it.

4) Staying on "low" takes a little more time, but you retain control.

5) Make sure you get the dog hair out of the way. I read somewhere that you can use a sock to cover the paw so that you are only getting the nail.

6) Be patient and try again, because it is worth it. A normal nail clipper leaves sharp jagged edges.



In particular, I love this Dremel, because it's affordable, cordless, easy to use, and compact. Plus, it's Dremel. What more can I say?

 "We get that it's good for dog's nails!" 2010-03-31
By J. Herbst (Indiana)
Please, people, stop writing reviews on how good this thing is with your dogs nails. We get it. If anyone uses this product for anything other than pet grooming, such as cutting metal, please let us know. Honestly, don't you all think it's a little redundant to have 24 pages of reviews?

 "Not good for the use I intended" 2010-03-30
By Darren P. Devigili
I can't complain about the construction of the tool or anything, but if you want it for removing callus you would be better off getting something with specialized bits. I haven't looked, but I suppose someone (possibly Dremel) makes a bits suitable for foot care...this does not come with one.

 "Great dog nail trimmer" 2010-03-24
By Stacy Grover
Love this little dremel! Sometimes I use the high speed, sometimes the low speed, but my dogs have never had nails that are so short or so soft. I've used the Pedipaws, but it doesn't have enough power to get my big standard poodle's heavy black nails. This works great, hopefully I'll be able to work the quicks shorter by using it frequently. The best thing is that my dog doesn't mind having it done. A few treats and they're begging to have their nails done.

 "Powerful little tool" 2010-03-20
By R. Lewis (Englewood, OH USA)
I love this tool to trim my dog's nail. The tool is quiet and fits in my hand. A lot easier to use than that other dog trimmer now being sold in all stores -- when will I learn that infomercials are a getcha. This tool is powerful and does not slow down when in use. I have used it several times and still have not needed to charge the battery. It is very portable.


Images Product

Buy Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool Now
Buy Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool |
Cheap Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Low Price Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Best Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Order Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Good Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Lowest Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Save Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Discount Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Purchase Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Shop Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Buying Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool | Where Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

1 Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool

Review Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool

Buy Cheap Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool From Here Now!
Remember how cool we all thought that first Dremel was? We're reliving the feeling with this one: lighter, faster, smarter, better, and stronger. The main improvement over the last generation is the battery source: lithium-ion. There are so many reasons to applaud. Lithium holds its charge up to six times longer in storage than nickel-cadmium batteries, so it's ready when you are. Remember the disappointment when you were ready and your battery was low? That won't happen with this one. It's got a battery fuel gauge that tells you how much life is left before a recharge, so you won't be caught without your Dremel, and if you choose to keep it on its charger, you won't cause memory and shorten the charge capacity. It's small, it's light, it's comfortable and maneuverable; it's everything the corded models are, but without the cord. We love it.--Kris Jensen-Van Heste
Readmore

Technical Details

- Lithium-ion battery holds charge while in storage for two years so light is always ready when you need it
- Includes 40 genuine Dremel accessories
- Variable speed from 5,000 to 35,000 rpm to match the proper speed required
- High capacity 10.8V Lithium-ion battery for longer run times
- Comfort grip housing for easier handling and better tool control
See more technical details

 "I like it better than the corded version" 2010-04-05
By J. Groh (Ohio)
I don't have much to say about this lithium powered Dremel. Battery lasts a long time, its light weight, and it has plenty of power just like the corded version.



I like this better than the corded because there isn't a cord that gets in the way or causes you to not be very accurate.



The only down side is the case. It kind of looks like it was made as a generic case for multiple Dremel products but everything does fit securely.

 "Never let's me down" 2010-04-02
By moremarbles (the California high desert)
I've owned this set for a few years, and there are many times when this tool is the only one for the job. It's one of those things you should own if you do a lot of projects yourself. It's good for a thousand different things, has a lot of power, and holds a charge for a long time. Never disappointed when I have to reach for a Dremel.

 "very nice" 2010-04-01
By Denny (Gainesville, Florida United States)
My initial impression is very good, although we will see how it holds up with time. Lot of plastic in this thing. It does have some power.

 "excellent" 2010-03-28
By Robert L. Michaels (BERLIN, NY, US)
I use my dremel rotary tool in many unique situations in building projects. This Dremel 8000 frees me up from plugging into the wall without losing the power I need on difficult jobs.

 "Verrrry handy tool." 2010-03-09
By Beverley A. Thomas (Guyana, South America)
So far I've used this tool to sand catches for wooden mosquito screens and knobs for cupboards. I've also used it for the main purpose I bought it, which is to grind down my dogs overly long nails.

I have two large thirteen (13) year old dogs, who are no longer as active as they used to be, and due to this, their nails were getting really long and therefore affecting the way they walk. I tried clippers which hurt them, emery boards, and even sanding by hand which took forever, but never I have achieved the results that this Dremel tool did in minutes.

I was a bit worried at first that the high pitched buzzing sound would scare them, but strangely enough, they ignored it and were very calm after they realised I didn't have the clippers with me!

I used the coarse sand paper barrel attachment to do this.

Bear in mind however, you can't leave the tool too long on each nail, or it will heat up and cause the animal pain. You also get quite a lot of nail dust.

After it's initial charge, the battery has not lost power from the door knobs,to the catches, to all the nails of 2 dogs (including front dew claws). This is the first re-chargeable tool I've ever had that did not die mid-job. It still has all 3 lights displaying full charge.

I have no regrets whatsoever about buying this tool.


Images Product

Buy Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool Now
Buy Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool |
Cheap Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Low Price Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Best Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Order Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Good Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Lowest Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Save Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Discount Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Purchase Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Shop Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Buying Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool | Where Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool

0 DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase

Review DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase

Buy Cheap DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase From Here Now!
Whether you’re shopping for your very first jointer for your home workshop or your third for your professional shop, we think Delta’s X5 is an excellent choice.

Its price tag comes in under many of its competitors, but the quality is still top-notch, and Delta didn’t skimp on the features, our favorite of which is the fence’s ability to tilt both left and right. If you’re cutting just a slight bevel, it doesn’t really matter which way the fence is angled. But for bigger angles, it’s tricky to keep your workpiece against the fence. Delta’s solution: Tilt the fence toward the cutterhead and flip your workpiece so it fits snugly into the lesser angle. Beauty!

We weren’t sure we’d like a lever as opposed to a good old handwheel for infeed table height adjustments, but it’s easy to operate and gave us precise adjustments. Rabbeting, tapering, edge and face jointing are all a pleasure to perform on the X5. Results were smooth and snipe-free, thanks to the three-knife cutterhead that was set perfectly right from the carton. With a 4800 rpm, you’re making 14,400 cuts a minute.

The X5’s capacities exceeded our expectations with a max width of 6-1/8 inches and a max depth pass of 1/8 inch. The table’s length is just shy of four feet, and we felt comfortable with workpieces as long as eight feet. The fence has positive stops at 45 and 90 degrees, and adjustment is quick and easy should you find them out of alignment.

Assembly took about 90 minutes, and that included swabbing off the generous grease Delta applied for shipping. This machine’s no lightweight at 225 pounds, so enlist a buddy’s help when you’re ready to set it up.

As jointers go, this one’s pleasantly quiet, plenty powerful and solid as a rock.--Kris Jensen-Van Heste
Readmore

Technical Details

- 1 HP jointer tackles rabbeting, tapering, edge, and face jointing projects
- Three-knife cutterhead creates 14,400 cuts per minute
- Adjustable infeed table features an easy lever operation
- Measures 46 x 28.5 x 48.5 inches; weighs 225 pounds
- Jointer includes an induction motor, enclosed stand, center-mounted fence, three-knife cutterhead, dust collector, and push blocks
See more technical details

Images Product

Buy DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase Now
Buy DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase |
Cheap DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Low Price DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Best DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Order DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Good DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Lowest DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Save DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Discount DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Purchase DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Shop DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Buying DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase | Where DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase

0 Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel

Review Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel

Buy Cheap Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel From Here Now!
3.5", Brushed Nickel, Small Centinel Pull, 3" Center To Center.
Readmore

Technical Details

- For Knobs and Pull in this Finish and Collection See Items 254-BRN, 255-BRN, 268-BRN & 256-BRN
- Length: 3.5"
- Width: 1"
- Projection: 1"
- Center to Center Spread: 3"
See more technical details

Images Product

Buy Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel Now
Buy Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel |
Cheap Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Low Price Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Best Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Order Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Good Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Lowest Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Save Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Discount Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Purchase Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Shop Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Buying Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel | Where Atlas Homewares 275-BRN 3-1/2-Inch The Moderns Collection Centinel Small Pull, Brushed Nickel