Buy Cheap Senco DS275-18 Cordless Collated Screwdriver From Here Now!
Includes DS275-18V, Cordless 18V Duraspin Collated Screwdriver - 2P0001R, 1-Hour Charger, 18V Ni-Cd Battery, (2) Nosepieces (one for drywall and one for wood), Case
Readmore
Technical Details
- Cordless 18 volt battery power for the demanding needs of professional remodelers and contractors.- Drives 1 to 3"screws ,even in hard woods.
- Easy depth of drive adjustment regulates the precise amount of countersink
- Trigger lock with reverse for continuous work
- Fast easy 50 screw strips to speed up production.
See more technical details
By Edsallstein (Seattle, WA USA)
WE HAVE DRIVEN MORE THAN 15,000 SCREWS WITH THE TWO GUNS WE HAVE. NO PROBLEMS. CUTS SCREW TIME FOR US NON PROS BY 75%. YOU CAN BUY IT, USE IT, AND RESELL ON AMZ OR EBAY AND COME OUT VERY WELL.
AMAZON: YOU NEED TO SELL THE BITS AND DRIVERS WITH PRIME. IF YOU NEED MORE, AND YOU WILL, YOU MUST PAY $8 FOR THE BITS AND $8 TO HAVE SHIPPED.
By All American Mall (Colorado)
First thing is that many sellers do not include battery with this tool so if you think you are getting a deal you may be getting ripped as battery is very expensive. There are also sellers who sell refurbished and the battery is junk which is why some people claim they can't even do a couple screws or just hate this tool. It is pretty much useless if the power source (battery is no good). So I strongly suggest not buying refurbished. You definitely should have 2 batteries so again need to check if seller includes 2 batteries or 1 or none. This is not always easy as many places do not want you to know they are not including battery so if any hesitation with an answer, RUN to different seller or place.
I bought mine new with 2 batteries and built 722 feet of 6 foot high cedar and treated privacy fence using all high quality thick boards, 3 rails, and 4x4 posts. I NEVER had a problem with this tool not living up to expectations. There were, however a few tricks I learned along the way, but certainly this tool did make it like I had a 3rd hand. 90% of the time the battery on charger was ready by the time battery on gun was dead, but even the few times it wasn't I only had to wait a few minute, go get a drink and take a break, and its ready. The tips were tough too. I used same 2 tips for entire project (3" & 1-5/8" screws had different heads).
SO the tricks I learned - if doing a deck its probably best suited and no need for any tricks. If doing horizontal screwing such as a fence then the angle is a big deal. if you are going at diagnal to wood (i.e. not squared up) then you will have problems getting screw all the way in, so keep it straight & square. Keeping it upright (top of gun up, battery end down) also helps keep screws from tangling and getting screws in all the way. It can screw with gun upside down but it takes patience and not as fast. On the top of gun there is gap near tip where I placed duct tape to keep empty plastic from catching - worked like a charm and so easy to do. I removed the removable plastic guard as it was just in way of loading screws. DO not slam or hit wood with gun as it makes tip and screw get off. Just place it there and give just enough pressure to engage tip with screw. This is not so easy to do as it seems slamming it feels right and gets screw started in wood, but a little patience and gentleness and habit is easy to acquire. It just seems like gusto and manliness works well when in fact the best idea is let the tool do the work. This also goes for how much you push it while it drives screws - let the tool drive them, not your arm. Lastly and probably least important is if going fast as I tried to do wanting and needing to get over 700 feet of fence done all alone, there is a pivot point on track that screws follow to gun tip. It is just before screw is in place for driving. I put small peice of electrical tape to help keep screw heads from catching. Screws not in plastic all the way (I would guess cheap ones dont work as well with this gun), or just working gun at angle or upside down cause head to catch sometimes and the little piece of tape make more gradual ramp for heads to go over. All these things I learned the first day, but they did have me wondering about the tool. Once I got to really know how it worked we were fast friends.
In summary I would HIGHLY recommend this tool for anyone who has a lot of screws to drive in fence, deck, drywall, or whatever. I cant think of any wood that is too tough for it. Just need to make sure you are getting 2 GOOD NEW (not refurbished) batteries, unless only going to work for 1-2 hours at a time then just need 1 battery. This is one of the best tools I have ever used and beats out any nailgun I used by a mile in all aspects except speed, but even then not by much.
By Jaret Paltzer (Manitowc, WI)
Pros: Cordless, collated screws, adjustable, 2 batteries, well balanced and fairly comfortable, rugged and takes a beating.
Cons: Battery life is very short, batteries do not hold a charge, battery locking mechanism is EXTREMELY awkward, screw length changes are tedious, long screws get bound up, very unforgiving for angles, if your not straight on it will miss the screw.
I do a lot of work on my own and this gun is just the thing when your hanging drywall and plywood by yourself. The problem I have is that in these situations it is very hard to have the gun perfectly perpendicular and the screws skip off the driver very easily. I keep my batteries charged up but whenever I grab one out of the case they are always dead. I've thrown this thing across the room and yard quite a few times now and it still works. I bought several buckets of screws and have used most of them with my little Dewalt 7.2v screwdriver. Save your sanity, your money and the environment, don't bother with this one.
By Dairylander
This thing is phenomenal. Seriously.
It increased my drywall hanging efficiency tenfold.
I have the 14 volt gun and it has more than sufficient power, even through 5/8 rock. Since it comes with two batteries there is no down time.
You cannot live without this tool. It will pay for itself in one day's use. You can find the collated screws everywhere.
By Michael James (Sparks, NV)
I bought one of these and have used it for a year now. I am in construction so it gets a work out. I can't believe how much time this saves, hanging drywall or puting down sub-floors this gun is worth every penny. I can't tell you how much time this will save you. I have only good things to say about the battery life on these guns. When you consider how many screws you can go through before a battery swap it is quite amazing. in conclusion this is one of the most valuable tools I own. If you need to get work done fast this is the tool for you.
Images Product
Buy Senco DS275-18 Cordless Collated Screwdriver Now
Buy Senco DS275-18 Cordless Collated Screwdriver |
Cheap Senco DS275-18 Cordless Collated Screwdriver | Low Price Senco DS275-18 Cordless Collated Screwdriver | Best Senco DS275-18 Cordless Collated Screwdriver | Order Senco DS275-18 Cordless Collated Screwdriver | Good Senco DS275-18 Cordless Collated Screwdriver | Lowest Senco DS275-18 Cordless Collated Screwdriver | Save Senco DS275-18 Cordless Collated Screwdriver | Discount Senco DS275-18 Cordless Collated Screwdriver | Purchase Senco DS275-18 Cordless Collated Screwdriver | Shop Senco DS275-18 Cordless Collated Screwdriver | Buying Senco DS275-18 Cordless Collated Screwdriver | Where Senco DS275-18 Cordless Collated Screwdriver
0 comments:
Post a Comment