0 DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit

Review DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit

Buy Cheap DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit From Here Now!
Features model No. DCD970 XRP 18V cordless hammerdrill with patented 3 speed all metal transmission and 1 2'' self tightening chuck delivers 450 units watts out of maximum performance, faster application speed, and superior bit retention. Model No. DC827 18V impact driver delivers 1330 in. lb. of torque and 2 to 2400 RPM offering power and speed to perform a wide range of fastening applications at faster speeds. DeWALT XRP exclusive NANO Phosphate lithium ion cells offer long battery life and durability. 2000 recharges. Includes: 1 hour NiCd NiMH lithium ion charger, (2) 18V XRP lithium ion battery packs, 360 side handle, and contractor bag.
Readmore

Technical Details

- DCD970 XRP 18V cordless hammerdrill with patented 3-speed all-metal transmission and 1/2-Inch self-tightening chuck delivers 450 units watts out of maximum performance, faster application speed, and superior bit retention
- DC827 18V Impact Driver delivers 1,330 in-lbs of torque and 0-2,400 rpms offering power and speed to perform a wide range of fastening applications at faster speeds
- DEWALT XRP exclusive Nano-phosphate lithium ion cells offer long battery life & durability: 2,000 recharges
See more technical details

 "Excellent tools" 2010-01-09
By Serge Colombeau (San Francisco, CA United States)
I love Dewalt, I have been using their tools for many years and I never had a problem. Yes the batteries are expensive but I recharge them every day more than one time and they just perform day after day. I always buy batteries on special so I get the better deal. I am a professional contractor, so I depend on my tools.

Amazon.com is the way to go, 2 days after ordering, my new tools are on the job site...

 "Great product, but you pay for the name." 2009-12-01
By A. D. Miller
Both the hammerdrill and impact drive meet and exceed expectations. Make all tasks seem effortless. Well constructed. The size and wieght benefit with the lithium vs the NiCad battery is noticeable. I would rather that they came with a hard case rather than the bag. They are more expensive than comparable competitors like Makita LXT202 18-Volt Hammer Drill & Impact Driver Lithium-Ion Combo Kit. If I was going to by a set again it would be a close call.

 "Clear the Myth" 2009-07-06
By DW
This is an excellent deal. While it may be true that Amazon is not an authorized dealer (not confirmed), you do not need a receipt for warranty service. There is a date code on each tool that DeWalt uses to verify date of purchase/warranty period. they do not need to know where it was purchased.

 "dewalt waranty invalidated" 2009-07-01
By David (Oklahoma)
potential buyers be warned that Dewalt will not honor warranty if you purchase a Dewalt tool from amazon.com. Dewalt customer service states that amazon.com is not an authorized online retailer for Dewalt and as such the warranty is void.


Images Product

Buy DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit Now
Buy DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit |
Cheap DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Low Price DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Best DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Order DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Good DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Lowest DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Save DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Discount DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Purchase DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Shop DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Buying DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit | Where DEWALT DCK275L 18-Volt XRP Hammerdrill/Impact Driver Combo Kit

0 Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories

Review Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories

Buy Cheap Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories From Here Now!
Single speed operates at 35,000 rpm.; Ideal for cutting, carving, grinding, sanding and drilling.; Lightweight design fits your hand comfortably, making it easy to handle and use in any position.; Cool-running ball bearing construction provides smooth and quiet operation.; Replaceable motor brushes help extend tool life.; Accepts more than 150 Dremel accessory bits.; Not for use with brushes, which should not be used over 15,000 rpm.; Can be used with attachments and the #221 Foot Speed Control, which gives the tool variable-speed capacity.; 120V AC, 50-60 Hz, 1.15 Amps; 10' Power Cord; 5 year warranty; Includes: #275 Single-Speed MultiPro Tool, 10 assorted bits, Quick Start Book, Quick-Change Collet Nut, #90962 Open End Collet Wrench,
Readmore

Technical Details

- Single speed control for fulltime 35,000 rpm operation
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
- Lightweight design for comfort during prolonged use
- Backed by 5-year warranty
See more technical details

 "Should have bought the multi-speed model." 2009-07-15
By Jonathan B. Adams (Houston)
This Dremmel tool worked ok for a few jobs, but having only one speed limits its use. It didn't come with any adapters either. Wish I would've spent the extra money for a more versatile tool.

 "Replacement of prior Dremel" 2009-06-17
By Michael C. Lane (USA)
Prior Dremel was a variable speed, which I rarely used below full speed. The new one works as advertised and I am quite pleased with it.

 "Works very good, using to sharpen my chain saw." 2009-06-02
By James C. Panter
Works very good, using to sharpen my chain saw. The old sears chain sharpen just wore out after 15 years. Took the part that is used in the old one and put it on this new one. Works great and I can use this mutli ways.

 "Basic Dremel Tool" 2009-04-08
By William Machrone (Scotch Plains, NJ United States)
With an inexpensive foot controller, this single-speed Dremel tool is all you need for many applications. Takes all the standard accessories. No runout or looseness in the spindle, no vibration. Plenty of power for typical Dremel tasks.

 "Great Kit for Cutting and Drilling" 2009-02-15
By Alex (Bakersfield, CA)
This is not a bad set at all, and this comes from someone who is no expert of metal shops, lolz. It's a useful tool to accomplish tasks that require a very high speed.



Unfortunately, this item is not for everything in desire. You can't use it to clean electronics for example, the speed is too great for that kind of stuff. They should have added speed control. I mean, why isn't there? All it is here is an on/off device, nothing between.



Considering the price and the value of money, I highly recommend it. Buy some tool bits with it too! ;)


Images Product

Buy Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories Now
Buy Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories |
Cheap Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Low Price Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Best Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Order Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Good Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Lowest Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Save Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Discount Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Purchase Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Shop Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Buying Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories | Where Dremel 100-N/10 MultiPro 1.15 Amp 35,000 RPM Rotary Tool with 10 Accessories

0 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50"

Review 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50"

Buy Cheap 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" From Here Now!
25 New Sanding Bands. This a new set of 25 fine grit sanding bands. They are ideal for polishing and cleaning all kinds of wood and metal. Can be used with a Dremel tool. Each measures approximately 1/2" (12.7 mm) in diameter. We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.
Readmore

Technical Details

See more technical details

Images Product

Buy 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" Now
Buy 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" |
Cheap 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Low Price 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Best 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Order 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Good 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Lowest 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Save 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Discount 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Purchase 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Shop 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Buying 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50" | Where 25 Abrasive Sanding Bands Rotary Tool Drum Fine .50"

0 Dremel 100-N/7 Single Speed Rotary Tool Kit

Review Dremel 100-N/7 Single Speed Rotary Tool Kit

Buy Cheap Dremel 100-N/7 Single Speed Rotary Tool Kit From Here Now!
Lightweight, single speed tool with ball bearing construction allow for cool running, quiet, smooth operation. Specs: Cord length 6', speed 35,000 rpm, voltage 120 AC/50-60 Hz. Includes: Mandrel, coarse 1/2", sanding drum, dressing stone, heavy duty emery cut off wheel, 1/2" 120 grit sanding band, aluminum oxide grinding stone, silicon carbide grinding stone.
Readmore

Technical Details

- Ideal when one speed is all you need
- Single speed control for fulltime 35,000 rpm operation
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
- Lightweight design for comfort during prolonged use
See more technical details

 "Nice Tool" 2010-01-07
By F. Miller (Hollywood, MD United States)
My son loves this tool. It's compact, not overly expensive and has multiple uses.

 "great little tool" 2009-11-21
By David Owens (La Mirada, CA USA)
This is a fixed speed basic small grinder/buffer. It replaced a rechargeable battery model that just stopped working. Dremel offers several collects and bits for this, but they have to be ordered separately.



I was hoping I could also use this for my dogs nails, but it is too loud for her. I am very happy with this well made product.

 "Dremel 100" 2009-11-18
By David Kolasky (Toledo, OH)
Needed a simple tool to engrave my blown glass objects. Fits the bill, and inexpensive, too! Had the cordless one prior to this, but after a year the cordless one would not hold a charge, even after purchasing a new charger.


Images Product

Buy Dremel 100-N/7 Single Speed Rotary Tool Kit Now
Buy Dremel 100-N/7 Single Speed Rotary Tool Kit |
Cheap Dremel 100-N/7 Single Speed Rotary Tool Kit | Low Price Dremel 100-N/7 Single Speed Rotary Tool Kit | Best Dremel 100-N/7 Single Speed Rotary Tool Kit | Order Dremel 100-N/7 Single Speed Rotary Tool Kit | Good Dremel 100-N/7 Single Speed Rotary Tool Kit | Lowest Dremel 100-N/7 Single Speed Rotary Tool Kit | Save Dremel 100-N/7 Single Speed Rotary Tool Kit | Discount Dremel 100-N/7 Single Speed Rotary Tool Kit | Purchase Dremel 100-N/7 Single Speed Rotary Tool Kit | Shop Dremel 100-N/7 Single Speed Rotary Tool Kit | Buying Dremel 100-N/7 Single Speed Rotary Tool Kit | Where Dremel 100-N/7 Single Speed Rotary Tool Kit

0 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000

Review 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000

Buy Cheap 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 From Here Now!
Dremel 90930 For use with Model 275, 285, 395 and 595* rotary tools (Type 3*, 4*, 5* and 6 only). They can also be used with the Dremel Contour Sander (Type 1 and 2).
Readmore

Technical Details

- Motor brushes for Dremel tool
- Replace every 60 hours
See more technical details

Images Product

Buy 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 Now
Buy 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 |
Cheap 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Low Price 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Best 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Order 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Good 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Lowest 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Save 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Discount 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Purchase 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Shop 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Buying 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000 | Where 5 Pack Dremel 90930 Carbon Motor Brushes for 275, 285, 395, 595, 6000

0 Dremel 225-01 Flex Shaft Attachment

Review Dremel 225-01 Flex Shaft Attachment

Buy Cheap Dremel 225-01 Flex Shaft Attachment From Here Now!
Allows fingertip control for tight corners and hard to reach areas. 36" cable for Moto Tools model No. 395, 285, and 275. 1 2" diameter hand piece. For light duty wood carving.
Readmore

Technical Details

- Comfort grip handpiece - allows finger tip control to cut, grind, sand, sharpen, polish and more!
- Integrated shaft lock button on the handpiece allows for easy accessory changes.
- Quick connect - easily attaches to your DREMEL rotary tool
- More flexible cable - provides more comfort during use.
- For use with rotary tool models 275, 285, 395, 398 and 780
See more technical details

 "Redeaming dremel purchase from amazon" 2010-03-15
By Jacob Heckman
I absolutely loved this attachment, only problem is that dremel is always sold out of the lube for it and hardware stores dont seem to have the thin wheel bearing grease i need

 "ray5028" 2010-02-08
By R. Manger (jackson, nj usa)
It fits my 380 model Dremel tool and works fine. No intructions with it, but I was able to figure it out OK. Price right.

 "Works with more tool types!" 2010-01-06
By J. Emmelhainz
This accessory actually works with the 400, 398, 395, 300, 285, 275, and 800 series tools, according to the dremel website. I noticed this because I found it weird that it wasn't going to work with either of the corded variable speed series currently being sold...but it does! Which is great, because I'm getting a 300 series tool :D

 "Flex shaft is great" 2009-12-18
By Alicyn (Alexandria, VA United States)
I use my dremel to drill holes in glass. The flex shaft is great because it's easy to handle and allows me to drill into water without risking putting my dremel into water. I also like using it with the foot pedal and the chuck. The flex shaft does what it says it does and does it well.

 "Non-functional" 2009-12-12
By Irving D. Smith (Chandler, AZ USA)
The item came without instructions and does not function with my Dremel driver. It mounts in the obvious way but does not drive the tool. Maybe contact with Dremel will solve the problem.


Images Product

Buy Dremel 225-01 Flex Shaft Attachment Now
Buy Dremel 225-01 Flex Shaft Attachment |
Cheap Dremel 225-01 Flex Shaft Attachment | Low Price Dremel 225-01 Flex Shaft Attachment | Best Dremel 225-01 Flex Shaft Attachment | Order Dremel 225-01 Flex Shaft Attachment | Good Dremel 225-01 Flex Shaft Attachment | Lowest Dremel 225-01 Flex Shaft Attachment | Save Dremel 225-01 Flex Shaft Attachment | Discount Dremel 225-01 Flex Shaft Attachment | Purchase Dremel 225-01 Flex Shaft Attachment | Shop Dremel 225-01 Flex Shaft Attachment | Buying Dremel 225-01 Flex Shaft Attachment | Where Dremel 225-01 Flex Shaft Attachment

0 Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit

Review Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit

Buy Cheap Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit From Here Now!
Since inventing the first high speed rotary tool over 75 years ago, Dremel has become the recognized leader in rotary tools, providing innovation, expertise and creative solutions for all of its users. With a variable speed of 5,000 to 35,000 rpm and designed to accept more than 150 accessories, the Dremel 75th Anniversary Limited-Edition Rotary Tool is perfect for home improvement, repair, crafts and hobbies. Stylish and comfortable, the rotary tool features comfort grip housing and special chrome-plated accents, including brush caps, collet, power switch/speed control and bail hanger that are unique to this limited-edition rotary tool. The limited-edition tool kit comes with 75 genuine Dremel accessories in the categories of cutting, polishing, sanding and grinding to give consumers all they need in one convenient set. The commemorative tin packaging harkens back to the early days when a Dremel rotary tool came inside a metal box. The tin is labeled with the Dremel 75th Anniversary logo and has storage space for the anniversary rotary tool, a 12-in-1 Multi-Tool and the 75 genuine Dremel accessories. The bonus 12-in-1 Multi-Tool is included and features pliers, cutters and an array of blades. Versatile and handy, it folds down to pocket size for easy carrying. With a $19.99 retail value, it is included as a special 75th anniversary bonus with the Limited-Edition Rotary Tool Kit.
Readmore

Technical Details

- 75th Anniversary Tool
- Accessory Mix
- A Bonus Multi-Tool-included
- Chrome Plated Accents
- Designed to accept more than 150 accessories
See more technical details

 "Dremel Review" 2010-01-30
By B. Lopez (El Paso, TX United States)
I bought this dremel as a Christmas gift for my step father. He absolutely loved it, especialy the fact that it is a multi-use tool. He can use it for all kinds of projects. It's a fantastic gift.

 "Haven't used yet" 2009-09-19
By A. Johnson (Augusta, GA)
I was so excited to find this set so cheap @ $49.95 that I immediately bought it. Although I haven't used it yet, but from the look of the contents of the box, I hope I will get a lot of use out of it.

 "This tool failed after 30 minutes of use" 2009-04-24
By Ed Mo. (USA)
The switch on this Anniversary Edition is flimsey plastic and the tool quit after 1/2 hr of use. Dremel promptly replaced the tool with a 300i free of charge; that one has a real switch and works great. The Anniversary Edition comes with a nice retro tin box and a pocket knife, which are nice touches, but the tool itself was no good (at least in my case). If you are looking for a multi-speed Dremel tool just buy the 300 series and skip this Anniversary Edition.

 "dremel 75th anniversary edition" 2009-03-27
By Kristin Sherman
This is a great little tool. Multiple speeds provide great versatility, and it comes with a nice basic assortment of accessories. Works great, awesome packaging. Makes you want to search around your house for projects just to find another excuse to use it! :)

 "5 Stars for the Tool.........." 2009-03-04
By Tommy H (Amherst, NY United States)
....and only 3 for the "Limited Edition Box", which is absolutely useless

after you open it for anything other than holiday cookies or something. I was under the impression I was getting a carry case for the tool and accessories and this is not the case at all. I did find a nice plastic toolbox at my local hardware for about $4 so it's no big deal I guess...


Images Product

Buy Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit Now
Buy Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit |
Cheap Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Low Price Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Best Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Order Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Good Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Lowest Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Save Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Discount Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Purchase Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Shop Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Buying Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit | Where Dremel 395/75 Dremel 75th Anniversary Limited Edition Rotary Tool Kit

0 Dremel 542D Carbide Cutting/Shaping Wheel

Review Dremel 542D Carbide Cutting/Shaping Wheel

Buy Cheap Dremel 542D Carbide Cutting/Shaping Wheel From Here Now!
Carbide Cutting/Shaping Wheel, For Use On Soft & Hard Woods, Use Wheel Edge For Cutting, Wheel Face For Shaping.
Readmore

Technical Details

- Ideal for cutting and shaping soft and hard woods
- Face of the wheel is used for shaping; the edge of the wheel is for cutting
- Made from long-lasting tungsten carbide coating
- Not for use on metal
- Measures 1 inch in bit diameter; 1.8 mm in thickness
See more technical details

 "Very useful little item." 2007-06-25
By J. Shultz (Maryland/DC)
I use this thing much more than I thought I would (e.g. small corrections to trim work, etc... Kind of pricey, but don't know of a better option.

 "Great Cutter" 2007-05-08
By Dale Hamby
I am using this cutting wheel with a Dremel Stylus and the combination is great. It cuts through anything. I build small robots and the cutting wheel constantly comes in handy.

 "Rocks My World" 2007-02-10
By Rachel Mello (Somerville, MA)
I've never bothered to write a tool review before, but this little bugger totally rocks my world. I was eating through standard and reinforced wheels like candy-corn, cutting "eucatex" (masonite) hardboard into irregular shapes. The awesome thing about this baby is that if you push it horizontally into your material it doesn't snap and send red-hot shards flying into your goggles, but instead actually cuts the material at the deflected angle! So hot!

 "Beginning to look a bit worn and tired." 2004-03-23
By Charles W. Long (Mission, TX United States)
My cutter has cut everything from balsa to hardwoods, and even some wire and plastic. After two years it really isn't worn out, but I am now ordering a replacement-- just in case I need it in the next year or two. In answer to the last reviewer who wonders what bits are available to fit Dremel tools. If he would use the universal chuck he could use any bit he could shove into it down to sub-miniature bits like I use to drill holes through toothpicks used to make small parts on ship models.

 "The Artworks Gallery of Carvings" 2002-08-03
By viki (california)
I use all the dremel products to carve my projects..My company would like to purchase at a wholesale prices, to order special bits that i use on a regular work load. I would like to request a list of all the bits that fit your dremel tools. I plan to place a hugh order,and don't know how to contact the dremel company in order to take care of this matter..can you please send me information for business purchases.
I need this information asap..as I have projects waiting to be finished.

Thank You for your time.
Viki Pierce
The Artworks Gallery of Carvings
559-905-0385
@1334 robinson ave.
Clovis,California.93612


Images Product

Buy Dremel 542D Carbide Cutting/Shaping Wheel Now
Buy Dremel 542D Carbide Cutting/Shaping Wheel |
Cheap Dremel 542D Carbide Cutting/Shaping Wheel | Low Price Dremel 542D Carbide Cutting/Shaping Wheel | Best Dremel 542D Carbide Cutting/Shaping Wheel | Order Dremel 542D Carbide Cutting/Shaping Wheel | Good Dremel 542D Carbide Cutting/Shaping Wheel | Lowest Dremel 542D Carbide Cutting/Shaping Wheel | Save Dremel 542D Carbide Cutting/Shaping Wheel | Discount Dremel 542D Carbide Cutting/Shaping Wheel | Purchase Dremel 542D Carbide Cutting/Shaping Wheel | Shop Dremel 542D Carbide Cutting/Shaping Wheel | Buying Dremel 542D Carbide Cutting/Shaping Wheel | Where Dremel 542D Carbide Cutting/Shaping Wheel

0 Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush

Review Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush

Buy Cheap Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush From Here Now!
Electric MultiPro™ Brushes Type: Replacement Brush For Use With: Dremel® - 275, 285 & 395 (Type 3 & 4)
Readmore

Technical Details

- Package Quantity: (1) 2 Pack
- Type: Replacement Brush
- For Use With: Dremel® - 275, 285 & 395 (Type 3 & 4)
See more technical details

Images Product

Buy Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush Now
Buy Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush |
Cheap Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Low Price Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Best Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Order Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Good Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Lowest Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Save Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Discount Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Purchase Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Shop Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Buying Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush | Where Dremel 90930 F/275,85,395 3-5 2/pk Dremel Carbon Motor Brush